Metabolic rate
Thermal Comfort (TG 22/2023) published by BSRIA in 2023 states: ‘Metabolic rates of humans are measured using the met unit. 1 met represents a heat output of 58 W per square metre of a person’s surface area. As an average adult has a surface area of about 1.7 m2 , their sensible heat output is about 100 W.’
Metabolic rate is a factor that can affect the thermal comfort of building occupants.
--BSRIA
[edit] Related articles on Designing Buildings.
- Adaptive thermal comfort.
- Comfort in low energy buildings.
- Evolving opportunities for providing thermal comfort.
- Healthy excursions outside the thermal comfort zone.
- Heat stress.
- Predicted mean vote.
- Predicted percentage dissatisfied.
- Psychometric charts.
- Retrofit and traditional approaches to comfort.
- Thermal comfort and wellbeing.
- Thermal comfort.
- Thermal pleasure in the built environment.
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
Green Book changes to drive investment in all parts of UK.
Minimum energy efficiency standards (MEES)
CIAT briefing on response to consultations for privately rented non-domestic properties.
Connect, collaborate, shape the future
Registration now live for UK Construction Week Birmingham.
CIOB announces Saul Humphrey FCIOB as new President for 26/27 term.
A quick, simple, and zero-bills solution to prevent overheating.
The adaptive reuse of large industrial structures.
Promoting the circular economy by extending the life of buildings.
CIAT responds to Climate Change Committee report
An urgent wake-up call for both government and the built environment.
Construction Management, 24 June
FMB pilot aims to build pipeline of site-ready tradespeople.
A quick introduction.
CLC publishes Mental Health Joint Code of Practice.
A quick introduction to its uses and risks.
Construction Management, 17 June
Government rolls out digital planning tool to all local authorities.
Comments
[edit] To make a comment about this article, or to suggest changes, click 'Add a comment' above. Separate your comments from any existing comments by inserting a horizontal line.